Lingman Machinery Technology (changzhou) Co., Ltd.

一、 Product introduction

When laser pipe cutting machine is cutting pipe fittings, it is necessary to clamp and fix the pipe fittings with chuck. The full stroke chuck generally has two sets of jaws that can be opened and closed separately. However, when used to clamp thin tubes or fragile tubes, the jaw stroke is not easy to control. Loose clamping will cause the tubes to fall off, and the processed tubes will be flattened or crushed during clamping, resulting in the scrapping of the processed tubes. To solve this problem, DF series full stroke square hole chuck G620DF-245 chuck is introduced.

Positive G620DF-245 center height 315mm, diameter stroke 236mm

Back Maximum clamping size of square tube: 245x245mm

Details Maximum clamping force 210kg (under 0.6MPa air pressure)

二、 Parameter Comparison Diagram

Performance Parameter

Dimension parameters

三、 Product advantages

1. High transmission efficiency and synchronization accuracy;

2. The chuck with the same overall dimension is applicable to a wider range of pipe sizes to be processed, which can effectively clamp thin pipes or fragile pipe fittings to prevent flattening, break through the limitation of circular holes, and have a wider clamping range, which is more in line with market demand;

3. The installation position of the reducer can be adjusted at will;

4.  Reduce the difficulty of processing and manufacturing, which is conducive to mass production; Better dustproof effect and better pollution resistance;

5. The product is widely used in pipe processing machine tool systems such as special laser pipe cutting machine.

四、 Product advantages

After reading the introduction of square hole chuck, the next group of experiments will make you see more intuitively.

① Front clip vide

② Small tube and thin wall tube test

③ Testing of large and thin-walled tubes

END